The Pickup Belt automatically scans for any Piles within a large area in front of the input end (the end that's touching the ground). Materials travel up this ramp and fall over into the next conveyor belt piece in the system. The Pickup Belt itself is a short ramp: One end of the belt touches the ground, and then it climbs up a short distance in the air before coming to an abrupt stop. The purpose of a Pickup Belt is to pick materials up from a Pile on the ground, and move them up onto the next belt in the system. This schematic shows the pickup zone and operation of a Lizard S-710 Pickup Belt. The system may contain any combination of these three piece types, depending on what purpose the conveyor system has been set up for, as explained in the next chapter. Each type of belt performs a completely different function as part of a combined Conveyor Belt system. Nonetheless, Conveyor Belts in general are in competition with Loaders for the task of moving loose cargo around.Ĭonveyor Belts come in three distinct varieties: Pickup Belts, Horizontal Belts, and Vertical Belts. Since each piece performs a completely different function along the belt system, they are not in competition with one another at all. Most pieces can be adjusted in various ways in order to connect them to one another and to precisely dump the cargo wherever it's needed.įarming Simulator 17 offers 3 different Conveyor Belt models - one from each of the three categories listed above. Any Conveyor Belt piece will dump its cargo into a receptacle if one is detected at the end of the belt, and can also be instructed to dump its cargo on the ground to create a new Pile.Įach Conveyor Belt piece can also be driven (at a very slow speed and low maneuverability) to adjust its position. They will always travel in a given direction, and will automatically continue from piece to piece, if the pieces are set up correctly. Materials can be dumped onto Conveyor Belts in a variety of ways. It all depends on what you're trying to accomplish with the particular Conveyor Belt system that you are setting up. None of the three pieces are mandatory - a conveyor system can work with any combination of any of the three groups, and you can connect multiple pieces from a single group together, if you need to. A Vertical Belt piece can raise the materials far above the ground, e.g.A Horizontal Belt piece can move that material a long distance from the starting point, or even around corners.A Pickup Belt piece can lift materials from Piles on the ground onto the conveyor system.Conveyor Belts are tricky to set up, and are not very mobile, but once set up they are extremely easy to use.Ī Conveyor Belt system is set up by connecting together up to three different types of "pieces": A Conveyor Belt system is a good alternative to using a Loader, particularly for loading cargo into a Container. Conveyor Belts are a new category of tools in Farming Simulator 17, whose purpose is to shift Piles of material from point A to point B along a series of moving belts.
0 Comments
Leave a Reply. |